When you buy the full kit (not the ‘Replacement CIS’) you get all you need to prime and run the system except for ink (or bottle-rack - but that is not required for operation!). That means you get 4, 6 or 7 (depending on the kit you select) bottles, caps with vent tube and ink line (CIS Unit, fully assembled), a support bracket to support the ink lines over the printer carriage, and a couple of rubber support to lift the lid of the printer slightly. You also get all the items you need to fix these together, and the items required to prime the kit with ink, and foam blocks to place in the cartridge sensor slots (for unchipped printers) or 100% full chips (for chipped printers).

You need to allow about 30 - 60 minutes to prime the system, ideally followed by a settle period, after which you can install to the printer in about 5-10 minutes. Please note that we do not normally ship the empty bottles when a CIS and Ink bundle is purchased; the ink bottles will serve as your first bottles (the CIS bundles with our inks offer savings over buying the items individually!).

Please note that MWORDS has closed. We aim to retain these support pages in the hope that they may benefit our past customers, but regret that we can no longer offer further comment or support in relation to the information above.